HS Code 4010.34 : Transmission belts or belting, Endless transmission belts of trapezoidal cross section (V-belts), other thanV-ribbed, of an outside circumference exceeding 180 cm but not exceeding 240 cm
MODULE 2: EXTRACTABLE ANSWER (AEO / SPEAKABLE)
EN (Official WCO)
FR (Pending)
ES (Pending)
The 6-digit Harmonized System (HS) code for transmission belts or belting, endless transmission belts of trapezoidal cross section (v-belts), other thanv-ribbed, of an outside circumference exceeding 180 cm but not exceeding 240 cm is 4010.34. Under the 2026 Japan (Japan Customs / 税関), the representative MFN general duty rate is Free [Japan Customs Tariff 2026].
MODULE 3: SIGNATURE A: HS DECODE VISUAL HIERARCHY
Subheading .34
.34
Transmission belts or belting, Endless transmission belts of trapezoidal cross section (V-belts), other thanV-ribbed, of an outside circumference exceeding 180 cm but not exceeding 240 cm
MODULE 4: SIGNATURE B: TARIFF MATRIX
Import Duty Rates by Destination
9-DIGIT JAPAN TARIFF CODE
4010.34.000
Japan Customs Schedule (実行関税率表)
Customs Authority
Japan Customs (税関)
NACCS Electronic Clearance
De Minimis Threshold
¥10,000 JPY
Art. 14-18 Customs Tariff Law
Advance Ruling System
Advance Ruling (事前教示)
Valid 3 years across Japan
TRACK THIS HS CODE
Get Real-Time Tariff & Trade Remedy Change Alerts for HS 4010.34
Receive an automated email notification whenever Japan Customs or the MOF publishes duty rate adjustments or customs notices for 4010.34.
MODULE 6: Mandatory Customs Entry Document Matrix
Rule-Derived Customs Entry Package Checklist
UNIVERSAL DOCUMENT
Commercial Invoice
Itemized description, currency, Incoterms, seller/buyer details, and country of origin.
UNIVERSAL DOCUMENT
Packing List & Bill of Lading
Gross/net weight, container/seal numbers, piece count, and transport B/L or Air Waybill.
PREFERENTIAL RULE
Certificate of Origin (If Claiming FTA)
Required only when claiming zero-duty preference under USMCA, KORUS, or GSP.
MODULE 7: Regulatory Compliance & Partner Government Agency (PGA) Flags
Standard Entry
This commodity does not carry mandatory PGA pre-clearance flags under the ACE message set.
MODULE 8: Japanese Trade Remedies (MOF Anti-Dumping / CVD) & Safeguards
MODULE 9: Free Trade Agreements (FTA) & Rules of Origin (RoO)
| Agreement Code | Trade Agreement / Program | Preferential Rate | Rules of Origin (RoO) Requirement |
|---|
MODULE 10: Logistics, Freight & Transport Specifications
Standard 20ft Container
~28 CBM / 28,000 kg Payload
Standard 40ft High-Cube
~68 CBM / 28,600 kg Payload
Stowage Factor & Handling
Standard commercial packaging for Transmission belts or belting, Endless transmission belts of trapezoidal cross section (V-belts), other thanV-ribbed, of an outside circumference exceeding 180 cm but not exceeding 240 cm
MODULE 11: Japan Customs Advance Ruling (事前教示制度)
Legally binding tariff classification rulings issued by Japan Customs (税関), valid for 3 years for HS 4010.34.
Query the official Japan Customs Advance Ruling database:
Search Japan Customs Advance Rulings Portal for 4010.34 →Japan Customs 9-Digit Tariff Schedule Lines (4010.34)
| Commodity Code | Description | Duty Rate | Unit |
|---|---|---|---|
| Endless transmission belts of trapezoidal cross-section (V-belts), other than V-ribbed, of an outside circumference exceeding 180 cm but not exceeding 240 cm | Free | — |
MODULE 12: Candidate Subheadings & Related Codes
| Related HS Code | Heading Category | Action |
|---|---|---|
| 4010.11 | Subheading under Heading 4010 | Compare Subheading 4010.11 → |
| 4010.12 | Subheading under Heading 4010 | Compare Subheading 4010.12 → |
| 4010.19 | Subheading under Heading 4010 | Compare Subheading 4010.19 → |
| 4010.31 | Subheading under Heading 4010 | Compare Subheading 4010.31 → |
| 4010.32 | Subheading under Heading 4010 | Compare Subheading 4010.32 → |
| 4010.33 | Subheading under Heading 4010 | Compare Subheading 4010.33 → |
| 4010.35 | Subheading under Heading 4010 | Compare Subheading 4010.35 → |
| 4010.36 | Subheading under Heading 4010 | Compare Subheading 4010.36 → |
Official Primary Sources & Authority References
USITC HTS Chapter 40 Tariff Schedule (2026) ↗
Official U.S. 10-digit tariff lines and general duty rates for Transmission belts or belting, Endless transmission belts of trapezoidal cross section (V-belts), other thanV-ribbed, of an outside circumference exceeding 180 cm but not exceeding 240 cm.
CBP CROSS Ruling Database (4010.34) ↗
Binding customs classification precedents for Heading 4010.
MODULE 14: Frequently Asked Questions (FAQ) & Operational Guide
What is the 6-digit WCO tariff classification and Japan (Japan Customs / 税関) general duty for Transmission belts or belting, Endless transmission belts of trapezoidal cross section (V-belts), other thanV-ribbed, of an outside circumference exceeding 180 cm but not exceeding 240 cm?
Under WCO Harmonized System 2022 and Japan (Japan Customs / 税関), Transmission belts or belting, Endless transmission belts of trapezoidal cross section (V-belts), other thanV-ribbed, of an outside circumference exceeding 180 cm but not exceeding 240 cm is classified under HS 4010.34 (Heading 4010, Chapter 40). The representative JP MFN general duty rate is Free.
How is HS 4010.34 distinguished within Heading 4010 (Conveyor or transmission belts or belting, of vulcanized rubber)?
Heading 4010 covers Conveyor or transmission belts or belting, of vulcanized rubber. Subheading 4010.34 specifically isolates Transmission belts or belting, Endless transmission belts of trapezoidal cross section (V-belts), other thanV-ribbed, of an outside circumference exceeding 180 cm but not exceeding 240 cm. Importers must verify whether physical characteristics, processing state, or composition require alternative subheadings under Heading 4010.
What are the primary candidate subheadings related to HS 4010.34?
Related subheadings under Heading 4010 include 4010.11, 4010.12, 4010.19, 4010.31, 4010.32, 4010.33, 4010.35, 4010.36. Classification depends on processing stage, decaffeination, purity, or material form.
What mandatory commercial entry documents are required to import Transmission belts or belting, Endless transmission belts of trapezoidal cross section (V-belts), other thanV-ribbed, of an outside circumference exceeding 180 cm but not exceeding 240 cm into Japan?
Importers require a Japan Customs Import Declaration (輸入申告書) lodged via NACCS by a licensed Customs Broker (通関士), Corporate Number, Commercial Invoice, Packing List, and Bill of Lading.
Can goods under HS 4010.34 enter duty-free under CPTPP or RCEP into Japan?
Yes. Goods originating in CPTPP member states, RCEP nations, EU Member States (Japan-EU EPA), or the United States (Japan-US Trade Agreement) satisfying origin rules enter Japan under preferential rates.
What is the Japanese customs duty and tax de minimis threshold for Transmission belts or belting, Endless transmission belts of trapezoidal cross section (V-belts), other thanV-ribbed, of an outside circumference exceeding 180 cm but not exceeding 240 cm?
Under Article 14-18 of the Customs Tariff Law, imported goods with a total CIF value of ¥10,000 JPY or less enter Japan duty-free and tax-free (excluding specified leather/textile items).
How can an importer obtain a Japan Customs Advance Ruling (事前教示) for HS 4010.34?
Importers or customs brokers may submit a written request for an Advance Ruling on Tariff Classification (事前教示制度) to Japan Customs (税関) for legally binding classification valid for 3 years.
What Consumption Tax (消費税) applies to imports of HS 4010.34 into Japan?
Japan levies Consumption Tax at 10.00% standard (8.00% reduced for food and beverages) on the CIF value plus customs duty. There is no US-style federal VAT/GST distinction.
Are there Merchandise Processing or Harbor Maintenance fees in Japan?
No. Japan does not charge US-style MPF or HMF. Importers pay the applied customs duty plus 10% Consumption Tax; declarations are lodged via NACCS.
What is the importer identification and customs broker requirement in Japan?
Commercial importers require a Corporate Number (法人番号) and typically clear through a licensed Customs Broker (通関士) via the NACCS electronic system.
What prohibited or restricted goods controls apply to HS 4010.34 in Japan?
Certain commodities require METI import approval, or MHLW/MAFF quarantine clearance, prior to Japan Customs release. Some leather and textile items carry tariff-rate quotas.
What Japanese trade remedy (anti-dumping / countervailing) measures apply to HS 4010.34?
Importers must verify whether anti-dumping or countervailing duties administered by the Ministry of Finance (MOF) and METI apply to their specific country of origin.
Are there entry processing fees or harbor taxes in Japan?
No. Japan does not charge additional entry processing fees or harbor taxes beyond applied customs duty and 10% Consumption Tax.
💬
Ask Jack — Customs Lookup