Home › Chapter 72 › Heading 7219 › 7219.34

HS Code 7219.34 : Not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm

The 6-digit Harmonized System (HS) code for not further worked than cold-rolled (cold-reduced), of a thickness of 0.5 mm or more but not exceeding 1 mm is 7219.34. Under the 2026 Cambodia (GDCE), the representative MFN general duty rate is 0% [General Department of Customs and Excise (GDCE)].

Chapter

Ch 72

Heading

7219

Subheading

7219.34

KH MFN Duty

MODULE 3: SIGNATURE A: HS DECODE VISUAL HIERARCHY

Chapter 72

Flat-rolled products of stainless steel, of a width of 600 mm or more

Heading 7219

7219

Flat-rolled products of stainless steel, of a width of 600 mm or more

Subheading .34

.34

Not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm

MODULE 4: SIGNATURE B: TARIFF MATRIX

Import Duty Rates by Destination

Cambodia (Cambodia GDCE Customs Tariff 2026)

7219.34

Representative General Duty

Verified July 2026 · General Department of Customs and Excise (GDCE)

MODULE 5: CAMBODIA IMPORT DUTY & 10% VAT BREAKDOWN

Base Customs Duty

MFN Rate [General Department of Customs and Excise (GDCE)]

Import VAT / Tax Rate

10% VAT

Local Tax Rate

De Minimis Threshold

KHR threshold

Customs Exemption Limit

Notice: Cambodia customs entry, tariff classification, MFN duty rates, and 10% VAT are governed by General Department of Customs and Excise (GDCE). Always verify declarable lines with General Department of Customs and Excise (GDCE) prior to import.

TRACK THIS HS CODE

Get Real-Time Tariff & Trade Remedy Change Alerts for HS 7219.34

Receive an automated email notification whenever USITC or CBP publishes duty rate adjustments or customs notices for 7219.34.

MODULE 6: Mandatory Customs Entry Document Matrix

Rule-Derived Customs Entry Package Checklist

UNIVERSAL DOCUMENT

Commercial Invoice

Itemized description, currency, Incoterms, seller/buyer details, and country of origin.

UNIVERSAL DOCUMENT

Packing List & Bill of Lading

Gross/net weight, container/seal numbers, piece count, and transport B/L or Air Waybill.

PREFERENTIAL RULE

Certificate of Origin (If Claiming FTA)

Required only when claiming zero-duty preference under USMCA, KORUS, or GSP.

MODULE 7: Regulatory Compliance & Partner Government Agency (PGA) Flags

Standard Entry This commodity does not carry mandatory PGA pre-clearance flags under the ACE message set.

MODULE 8: CAMBODIA Trade Remedies & Safeguards

General Department of Customs and Excise (GDCE) Anti-Dumping / Trade Defence

Standard Cambodia GDCE Customs Tariff 2026

Steel & Commodity Safeguards

Safeguard Measures May Apply

Regulatory Compliance Status

Standard Statutory Clearance

MODULE 9: Free Trade Agreements (FTA) & Rules of Origin (RoO)

Browse all preferential trade calculators & compliance tools in our Customs Tools Hub ↗.

Agreement Code	Trade Agreement / Program	Preferential Rate	Rules of Origin (RoO) Requirement
MFN	WCO Most-Favoured-Nation (MFN) Status	Standard MFN Rate	Applies to all WTO member states for Not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm.
FTA	Cambodia Preferential & Regional Trade Agreements	Free / Concessional	Subject to official Certificate of Origin & Rules of Origin (RoO) requirements.

MODULE 10: Logistics, Freight & Transport Specifications

Standard 20ft Container

~28 CBM / 28,000 kg Payload

Standard 40ft High-Cube

~68 CBM / 28,600 kg Payload

Stowage Factor & Handling

Standard commercial packaging for Not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm

MODULE 11: GDCE Customs Advance Ruling System

Legally binding advance tariff rulings issued by General Department of Customs and Excise for HS 7219.34.

Query official Customs portal:

Search Official Customs Portal for 7219.34 →

Cambodia Declarable Tariff Schedule (7219.34)

National line-level (8/10-digit) detail for Cambodia (GDCE): coverage in progress.

Universal 6-digit WCO backbone applied rate: 0%. Confirm the full national commodity code at the official source (General Department of Customs and Excise (GDCE)).

MODULE 12: Candidate Subheadings & Related Codes

Related HS Code	Heading Category	Action
7219.11	Subheading under Heading 7219	HS 7219.11 Cambodia Duty & Entry Rules →
7219.12	Subheading under Heading 7219	HS 7219.12 Cambodia Duty & Entry Rules →
7219.13	Subheading under Heading 7219	HS 7219.13 Cambodia Duty & Entry Rules →
7219.14	Subheading under Heading 7219	HS 7219.14 Cambodia Duty & Entry Rules →

Official Primary Sources & Authority References

Cambodia (Cambodia GDCE Customs Tariff 2026) ↗

Official Cambodia tariff schedule and MFN duty rates — administered by General Department of Customs and Excise (GDCE).

General Department of Customs and Excise (GDCE) — Advance Tariff Ruling ↗

Binding tariff classification precedents administered by GDCE Customs Advance Ruling System.

MODULE 14: Frequently Asked Questions (FAQ) & Operational Guide

What is the 6-digit WCO tariff classification and United States (USITC HTS) general duty for Not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm?

Under WCO Harmonized System 2022 and United States (USITC HTS), Not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm is classified under HS 7219.34 (Heading 7219, Chapter 72). The representative KH MFN general duty rate is 0%.

How is HS 7219.34 distinguished within Heading 7219 (Flat-rolled products of stainless steel, of a width of 600 mm or more)?

Heading 7219 covers Flat-rolled products of stainless steel, of a width of 600 mm or more. Subheading 7219.34 specifically isolates Not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm. Importers must verify whether physical characteristics, processing state, or composition require alternative subheadings under Heading 7219.

What are the primary candidate subheadings related to HS 7219.34?

Related subheadings under Heading 7219 include 7219.11, 7219.12, 7219.13, 7219.14, 7219.21, 7219.22, 7219.23, 7219.24. Classification depends on processing stage, decaffeination, purity, or material form.

What mandatory commercial entry documents are required to import Not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm?

Commercial Invoice (detailing Incoterms, currency, and origin), Packing List, Bill of Lading (or Air Waybill), CBP Form 7501 Entry Summary, and a continuous customs bond are required for formal entries.

Can goods under HS 7219.34 enter duty-free under USMCA or Free Trade Agreements?

Yes. Eligible goods originating in Mexico, Canada, South Korea, or Australia enter duty-free under preference SPI codes (P, KR, AU) provided they satisfy Regional Value Content (RVC) or tariff-shift rules with a valid Certificate of Origin.

What is the US formal entry threshold for shipments of Not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm?

Commercial shipments of Not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm with a customs value exceeding $2,500 USD require formal customs entry (CBP Form 7501) and a continuous entry bond. Informal entry applies to lower values.

How can an importer obtain a binding CBP classification ruling for HS 7219.34?

Importers may submit an e-Ruling request under 19 CFR Part 177 to CBP National Commodity Specialist Division (NCSD) to obtain a legally binding tariff classification ruling prior to importation.

What import VAT or sales tax applies to HS 7219.34 in Cambodia?

Commercial imports of Not further worked than cold-rolled (cold-reduced), Of a thickness of 0.5 mm or more but not exceeding 1 mm under HS 7219.34 into Cambodia are subject to 10% VAT, assessed on the entered customs value plus applicable duties.

What is the customs duty de minimis threshold in Cambodia?

The customs de minimis threshold for import shipments into Cambodia is KHR threshold. Consignments under this value may qualify for duty-free or simplified entry under local regulations.

Which authority regulates customs entry and tariff classification in Cambodia?

Customs declarations, import duty assessments, and GDCE Customs Advance Ruling System for HS 7219.34 are administered by General Department of Customs and Excise (GDCE).

💬 Ask Jack — Customs Lookup